Teraflex HD Ball Joint Kit w/out Knurl – 2 Upper and 2 Lower – JT/JL w/ D30 or D44
$299.99$319.28 (-6%)
TeraFlex JL / JT: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles. Features and Benefits 30mm (1.18”) adjustable ball stud for accurate initial and future preload adjustments using simple hand tools Heat-treated 4140 chromoly ball studs Heat-treated 1045 carbon steel housing and threaded retaining ring Magnesium Phosphate coating provides corrosion resistance and decreases friction Hard alloy tool steel slotted wear plate for ball stud to socket wear protection Wear plate features dual helical grease channels for increased flow through entire joint ensuring longevity and predictable operation Grease channels also allow spent grease to exit through low-profile seal Includes factory style slotted nuts and cotter pins Low-profile single lip dust seal prevents contaminants and eliminates concerns for torn conventional dust boots Heavy-duty snap ring on upper ball joint prevents ball joint separation from the axle during extreme off-roading Ball joint preload adjustability provides the end user with near effortless wear adjustment Preload adjustment requires simple tools and can be performed with the vehicle on the ground Simple locking mechanism w/ 1 screw and revised geometry so adjustment tool doesn’t slip as easily 2 grease zerk fittings allow greasing access from either side Notes: • Ball Joints w/out Knurl won’t score the inner knuckle and open the bore. • Ball Joints w/ Knurl are for inner knuckles that have a “loose press fit” due to repeated ball joint replacement and/or where knurled ball joints have been installed.
TeraFlex JL / JT: HD Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. Fits all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles.
Features and Benefits
30mm (1.18”) adjustable ball stud for accurate initial and future preload adjustments using simple hand tools
Heat-treated 4140 chromoly ball studs
Heat-treated 1045 carbon steel housing and threaded retaining ring
Magnesium Phosphate coating provides corrosion resistance and decreases friction
Hard alloy tool steel slotted wear plate for ball stud to socket wear protection
Wear plate features dual helical grease channels for increased flow through entire joint ensuring longevity and predictable operation
Grease channels also allow spent grease to exit through low-profile seal
Includes factory style slotted nuts and cotter pins
Low-profile single lip dust seal prevents contaminants and eliminates concerns for torn conventional dust boots
Heavy-duty snap ring on upper ball joint prevents ball joint separation from the axle during extreme off-roading
Ball joint preload adjustability provides the end user with near effortless wear adjustment
Preload adjustment requires simple tools and can be performed with the vehicle on the ground
Simple locking mechanism w/ 1 screw and revised geometry so adjustment tool doesn’t slip as easily
2 grease zerk fittings allow greasing access from either side
Notes:
• Ball Joints w/out Knurl won’t score the inner knuckle and open the bore.
• Ball Joints w/ Knurl are for inner knuckles that have a “loose press fit” due to repeated ball joint replacement and/or where knurled ball joints have been installed.
Additional information
Dimensions | 6.33 × 6.33 × 5.75 in |
---|---|
Fitment | Wrangler JL, Gladiator JT 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
Model | gladiator, jeep, jl, jt, rubicon, wrangler |
Years | 2018,2019,2020,2021,2022,2023,2024 |
Universal | False |
Adjustable | Yes |
Axle Type | Dana 30 / 44 |
Greaseable | Yes |
Material | |
Qty | 1 Kit |
Rebuildable |
Reviews
There are no reviews yet.