PRO 6.5″ Shallow Neodymium Full-Range Loudspeaker 150 Watts Rms 8-Ohm

DS18 PRO-NS6 6.5″ Shallow Neodymium Mid-Range Loudspeaker 300 Watts 8-Ohm DS18’s new Neodymium shallow speakers were designed to give you maximum loudness and volume all while keeping a nice small framed package. Most neo speakers are full size and take up a good amount of mounting depth, with these new Neo slim speakers, you can get that insane neodymium loudness where there is not much room for full size speakers. This 6.5 inch neodymium 1.5″ voice coil Mid-Range speaker takes 150w RMS and 300w peak power, so you know they will get loud easily. The 94dB sensitivity rating will be sure to give you plenty of volume as well for years and years of enjoyment. Highlights Neodymium Slim design so now you can get all that neodymium power and volume in a slim frame. High efficiency 1.5 inch voice coil that handles 150w RMS and 300w peak power for extreme loudness and frequency precision. Shallow mounting depth of only 1.96 inches, these neodymium midrange speakers can fit almost anywhere you need great sound and max volume. Technical Details PRO-NS6 Product Manual Nominal Diameter 6.5″ / 167mm Nominal Impedance 8 Ohms RMS Power Handling 150W MAX Power Handling 300W Sensitivity (1w/1m) 94 dB Frequency Response 100Hz – 12KHz Recommended Hi Pass Crossover 180Hz Pair or Single Single MOTOR 1.5”/38.6 mm Voice Coil Diameter KSV Voice Coil Former Material Copper Winding Material Paper Cone Material Paper Dust Cap Material Cloth Surround Materia Steel Basket Material Glossy Red Basket Color Neodymium Magnet Material 1.79 Oz Magnet Weight THIELE & SMALL PARAMETERS Equivalent Volume 4.8L / 0.169ft3 Excursion (one way) 2 mm Free Air Resonance 139 Hz Mechanical Factor 5.781 Electrical Factor 1.245 Total Factor 1.025 Mechanical Mass 6.498g Mechanical Compliance 192.236m cm/N BL Factor 5.38 Voice Coil Inductance 5.1455mH Cone Area 132.732 Cm3 DC Resistance 6.5 ohms Mechanical Mass w/o air/ 8.9g MEASUREMENTS Overall Diameter 6.57” / 167mm Overall Depth 2.2” / 56mm Front Mount Baffle Cutout 5.7” / 145mm Mounting Depth 1.96” / 50mm Motor Diameter 4” / 103mm