Uncategorized- Page 447 of 457 - Yittzy Offroad
  • Jeep Wrangler JL and Jeep Gladiator JT Ball Joint Kit-72%

    Jeep Wrangler JL and Jeep Gladiator JT Ball Joint Kit

    FREE delivery

    What It Fits:
    Jeep Wrangler JL (2018-2024) 4WD
    Jeep Gladiator JT (2019-2024) 4WD

    The Special Sauce:

    HOUSING
    • SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
    • Knurled Housings: The preferred design for aftermarket installations.
    • CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
    BALL STUDS
    • SAE 4140 Hot Forged Chromoly Ball Studs: For the strongest possible metallurgy.
    • Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
    • Polished Ball Studs: Built like an anti-friction bearing with extremely precise tolerances.
    • Rolled Threads: Made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain’t no Ikea furniture!
    • Step Threads: Allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
    BEARING DESIGN
    • Bronze Bearing Design: Our newest improvement in bearing design. Combines our perfectly polished ball studs, encased in a solid steel forged housing, lined with a highly durable, low friction bronze bearing.
    BOOTS
    • CR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
    • Internal Seal Boot: The boot is coined onto the ball joint, for superior sealing against contaminants.
    FINISH
    • Phosphate Finish: Extremely durable. Double coated. Rugged look.
    HARDWARE
    • Grade 8 – Class 10.9 Hardware: Superior tensile strength.
    • Castle Nut: Industry standard where high vibration loads occur.
    LUBRICATION
    • Pre Threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
    • Greaseable: Because it should be.
    • Pre-Greased: Just in case you forget, we have you covered.
    • Gull Winged Grease Grooves: Allows for improved lubrication disbursement around the ball stud.
    • Zerk Fittings: Included for every application.

    Where It Fits:

    Vehicle Position: Front
    Quantity per Vehicle: 1

    None

    $91.43$329.02
    Add to cart
    Add to wishlist
    Compare
    FREE delivery
  • Jeep Super HD Ball Joint Kit-8%

    Jeep Super HD Ball Joint Kit

    FREE delivery

    This KIT203 2-pack Contains 1 Upper and 1 Lower Ball Joint.

    For a 4-pack see KIT103

    What It Fits:
    Jeep Cherokee (1990-2001) 2WD or 4WD
    Jeep Comanche (1990-1992) 2WD or 4WD
    Jeep Grand Cherokee (1993-1998) 2WD or 4WD
    Jeep Grand Wagoneer (1993) 2WD or 4WD
    Jeep Wrangler TJ (1997-2006) 4WD
    Jeep Wagoneer (1990) 2WD or 4WD
    Jeep Wrangler YJ (1960-2006) 4WD

    The Special Sauce:

    HOUSING
    • SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
    • Knurled Housings: The preferred design for aftermarket installations.
    • CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
    BALL STUDS
    • SAE 4140 Hot Forged Chromoly Ball Studs: For the strongest possible metallurgy.
    • Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
    • LOWER: Polished Ball Studs: Built like an anti-friction bearing with extremely precise tolerances.
    • Rolled Threads: Made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain’t no Ikea furniture!
    • Step Threads: Allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
    BEARING DESIGN
    • UPPER: Carbon Bearing Design: Used mainly in Jeep and Dodge upper ball joints is the solver of all things wobbly. Like all our products.
    • LOWER: Military Grade Acetal Bearing: The same bearing material spec’d by the US military for Hummer ball joints. This material is: dimensionally stable (doesn’t expand or contract with hot or cold, water or oil absorption), can be polished smooth as steel, is anti-friction, doesn’t wear itself out under load like metal on metal, and can take an absolute pounding.
    BOOTS
    • CR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
    • Pancake Boot
    FINISH
    • Phosphate Finish: Extremely durable. Double coated. UPPER: Threads coated as well. Rugged look.
    HARDWARE
    • Grade 8 – Class 10.9 Hardware: Superior tensile strength.
    • Castle Nut: Industry standard where high vibration loads occur.
    LUBRICATION
    • Pre Threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
    • Greaseable: Because it should be.
    • Pre-Greased: Just in case you forget, we have you covered.
    • Gull Winged Grease Grooves: Allows for improved lubrication disbursement around the ball stud.
    • Zerk Fittings: Included for every application.
    SPECIAL FEATURES
    • Custom Features: UPPER: Custom Bearing design to eliminate Death Wobble.
    • Custom Features: LOWER: Angled Zerk housing for easier servicing.

    Where It Fits:

    Vehicle Position: Front Upper, Front Lower
    Quantity per Vehicle: 1

    Moog Interchange: K3134T & K3161T

    None

    $123.03$134.27
    Add to cart
    Add to wishlist
    Compare
    FREE delivery
  • Jeep Super HD Ball Joint Kit-73%

    Jeep Super HD Ball Joint Kit

    FREE delivery

    What It Fits:
    Jeep Cherokee (1990-2001) 2WD or 4WD
    Jeep Comanche (1990-1992) 2WD or 4WD
    Jeep Grand Cherokee (1993-1998) 2WD or 4WD
    Jeep Grand Wagoneer (1993) 2WD or 4WD
    Jeep Wrangler TJ (1997-2006) 4WD
    Jeep Wagoneer (1990) 2WD or 4WD
    Jeep Wrangler YJ (1960-2006) 4WD

    The Special Sauce:

    HOUSING
    • SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
    • Knurled Housings: The preferred design for aftermarket installations.
    • CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
    BALL STUDS
    • SAE 4140 Hot Forged Chromoly Ball Studs: For the strongest possible metallurgy.
    • Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
    • LOWER: Polished Ball Studs: Built like an anti-friction bearing with extremely precise tolerances.
    • Rolled Threads: Made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain’t no Ikea furniture!
    • Step Threads: Allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
    BEARING DESIGN
    • UPPER: Carbon Bearing Design: Used mainly in Jeep and Dodge upper ball joints is the solver of all things wobbly. Like all our products.
    • LOWER: Military Grade Acetal Bearing: The same bearing material spec’d by the US military for Hummer ball joints. This material is: dimensionally stable (doesn’t expand or contract with hot or cold, water or oil absorption), it can be polished smooth as steel, is anti-friction, Doesn’t wear itself out under load like metal on metal, and can take an absolute pounding.
    BOOTS
    • CR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
    • Pancake Boot
    FINISH
    • Phosphate Finish: Extremely durable. Double coated. UPPER: Threads coated as well. Rugged look.
    HARDWARE
    • Grade 8 – Class 10.9 Hardware: Superior tensile strength
    • Castle Nut: Industry standard where high vibration loads occur.
    LUBRICATION
    • Pre Threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
    • Greaseable: Because it should be.
    • Pre-Greased: Just in case you forget, we have you covered.
    • Gull Winged Grease Grooves: Allows for improved lubrication disbursement around the ball stud.
    • Zerk Fittings: Included for every application.
    SPECIAL FEATURES
    • Custom Features: UPPER: Custom Bearing design to eliminate Death Wobble.
    • Custom Features: LOWER: Angled Zerk housing for easier servicing.

    Where It Fits:

    Vehicle Position: Front Upper, Front Lower
    Quantity per Vehicle: 1

    Moog Interchange: K3134T & K3161T

    None

    $63.00$236.77
    Add to cart
    Add to wishlist
    Compare
    FREE delivery
  • Double Shear Hydro Assist Stabilizer Clamp, Zinc, 1.5 Inch ID-8%

    Double Shear Hydro Assist Stabilizer Clamp, Zinc, 1.5 Inch ID

    FREE delivery

    This fits our 1.5 Inch Tie Rods – this fits the double shear hydro assist system.

    Zinc coated DOM steel.

    None
    None
    None

    $123.03$134.27
    Add to cart
    Add to wishlist
    Compare
    FREE delivery
  • Jeep Wrangler JL and Jeep Gladiator JT Ball Joint Kit-72%

    Jeep Wrangler JL and Jeep Gladiator JT Ball Joint Kit

    FREE delivery

    What It Fits:
    Jeep Wrangler JL (2018-2024) 4WD
    Jeep Gladiator JT (2019-2024) 4WD

    The Special Sauce:

    HOUSING
    • SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
    • Knurled Housings: The preferred design for aftermarket installations.
    • CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
    BALL STUDS
    • SAE 4140 Hot Forged Chromoly Ball Studs: For the strongest possible metallurgy.
    • Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
    • Polished Ball Studs: Built like an anti-friction bearing with extremely precise tolerances.
    • Rolled Threads: Made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain’t no Ikea furniture!
    • Step Threads: Allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
    BEARING DESIGN
    • Bronze Bearing Design: Our newest improvement in bearing design. Combines our perfectly polished ball studs, encased in a solid steel forged housing, lined with a highly durable, low friction bronze bearing.
    BOOTS
    • CR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
    • Internal Seal Boot: The boot is coined onto the ball joint, for superior sealing against contaminants.
    FINISH
    • Phosphate Finish: Extremely durable. Double coated. Rugged look.
    HARDWARE
    • Grade 8 – Class 10.9 Hardware: Superior tensile strength.
    • Castle Nut: Industry standard where high vibration loads occur.
    LUBRICATION
    • Pre Threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
    • Greaseable: Because it should be.
    • Pre-Greased: Just in case you forget, we have you covered.
    • Gull Winged Grease Grooves: Allows for improved lubrication disbursement around the ball stud.
    • Zerk Fittings: Included for every application.

    Where It Fits:

    Vehicle Position: Front
    Quantity per Vehicle: 1

    None

    $91.43$329.02
    Add to cart
    Add to wishlist
    Compare
    FREE delivery
  • Standard Stabilizer Clamp, Zinc, 2 Inch ID-8%

    Standard Stabilizer Clamp, Zinc, 2 Inch ID

    FREE delivery

    This fits our 2 Inch Tie Rods – for all model steering stabilizers that use an OE style mounting system with 1/2” bolt.

    Zinc coated DOM steel.

    None
    None
    None

    $104.97$113.77
    Add to cart
    Add to wishlist
    Compare
    FREE delivery
  • Jeep Super HD Ball Joint Kit-73%

    Jeep Super HD Ball Joint Kit

    FREE delivery

    What It Fits:
    Jeep Cherokee (1990-2001) 2WD or 4WD
    Jeep Comanche (1990-1992) 2WD or 4WD
    Jeep Grand Cherokee (1993-1998) 2WD or 4WD
    Jeep Grand Wagoneer (1993) 2WD or 4WD
    Jeep Wrangler TJ (1997-2006) 4WD
    Jeep Wagoneer (1990) 2WD or 4WD
    Jeep Wrangler YJ (1960-2006) 4WD

    The Special Sauce:

    HOUSING
    • SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
    • Knurled Housings: The preferred design for aftermarket installations.
    • CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
    BALL STUDS
    • SAE 4140 Hot Forged Chromoly Ball Studs: For the strongest possible metallurgy.
    • Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
    • LOWER: Polished Ball Studs: Built like an anti-friction bearing with extremely precise tolerances.
    • Rolled Threads: Made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain’t no Ikea furniture!
    • Step Threads: Allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
    BEARING DESIGN
    • UPPER: Carbon Bearing Design: Used mainly in Jeep and Dodge upper ball joints is the solver of all things wobbly. Like all our products.
    • LOWER: Military Grade Acetal Bearing: The same bearing material spec’d by the US military for Hummer ball joints. This material is: dimensionally stable (doesn’t expand or contract with hot or cold, water or oil absorption), it can be polished smooth as steel, is anti-friction, Doesn’t wear itself out under load like metal on metal, and can take an absolute pounding.
    BOOTS
    • CR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
    • Pancake Boot
    FINISH
    • Phosphate Finish: Extremely durable. Double coated. UPPER: Threads coated as well. Rugged look.
    HARDWARE
    • Grade 8 – Class 10.9 Hardware: Superior tensile strength
    • Castle Nut: Industry standard where high vibration loads occur.
    LUBRICATION
    • Pre Threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
    • Greaseable: Because it should be.
    • Pre-Greased: Just in case you forget, we have you covered.
    • Gull Winged Grease Grooves: Allows for improved lubrication disbursement around the ball stud.
    • Zerk Fittings: Included for every application.
    SPECIAL FEATURES
    • Custom Features: UPPER: Custom Bearing design to eliminate Death Wobble.
    • Custom Features: LOWER: Angled Zerk housing for easier servicing.

    Where It Fits:

    Vehicle Position: Front Upper, Front Lower
    Quantity per Vehicle: 1

    Moog Interchange: K3134T & K3161T

    None

    $63.00$236.77
    Add to cart
    Add to wishlist
    Compare
    FREE delivery
  • Chevrolet / Ford / Jeep Super HD Ball Joint Kit-9%

    Chevrolet / Ford / Jeep Super HD Ball Joint Kit

    FREE delivery

    This KIT261 2-pack Contains 1 Upper and 1 Lower Ball Joint.

    For a 4-pack see KIT161

    What It Fits:
    Chevrolet Blazer (1987-1991) 2WD or 4WD
    Chevrolet Blazer (1970-1974) 4WD
    Chevrolet Blazer (1975-1984) 4WD
    Chevrolet K10 (1975-1986) 2WD pr 4WD
    Chevrolet K10 Pickup (1970-1974) 2WD or 4WD
    Chevrolet K10 Suburban (1970-1986) 2WD or 4WD
    Chevrolet K20 (1975-1986) 2WD or 4WD
    Chevrolet K20 Pickup (1970-1974) 2WD or 4WD
    Chevrolet K20 Suburban (1970-1986) 2WD or 4WD
    Ford Bronco (1974-1979) 2WD or 4WD
    Jeep Cherokee (1974-1983) 2WD or 4WD
    Jeep CJ5 (1972-1983) 4WD
    Jeep CJ6 (1972-1975) 4WD
    Jeep CJ7 (1976-1986) 4WD
    Jeep Commando (1972-1973) 4WD
    Jeep Grand Wagoneer (1984-1991) 2WD or 4WD
    Jeep J10 Pickup (1974-1988) 4WD
    Jeep J20 Pickup (1974-1988) 4WD
    Jeep CJ8 Scrambler (1981-1985) 4WD
    Jeep Wagoneer (1974-1983) 2WD or 4WD

    None
    None
    None

    $132.06$144.52
    Add to cart
    Add to wishlist
    Compare
    FREE delivery

Main Menu

Get a 15% Discount
Explore Yittzy and find a lot of useful tools and gadgets for your Jeep or other four-wheel-drive vehicles. Register now to get the latest updates for discounts and special offers.
    SUBSCRIBE
    Don't show this popup again, Click Here.